Date Selection Series
How to Use an Auspicious Date
Date Selection Tip:
It’s a date! When you already have an auspicious date selected you need to follow these simple suggestions to make sure that it will have an effect.
-
Make sure that the time is relevant to your time and location. It means that you need to follow the “True Solar Time” to make sure that the yang qi you are receiving coincides with the actual location where you are going to perform the activity. Please remember that GMT time has nothing to do with the real qi of the universe. It is simply a measure of time for convenience.
-
You can start the “activity” 15-30 minutes after the selected time or towards the middle of the selected time. This is to make sure that you are starting the activity within the selected auspicious time. The selected auspicious time usually spans over 2 hours. Here is an example, if the selected time is 1138-1338, try to start the “activity” around 1200hrs or so to make sure that you are within the time frame.
-
The “activity” must be taken on a specified auspicious time and continued until completion with no more than a few days of interruption.
-
You can continue the “activity” to other areas that are near to the initial spot without a need for a new auspicious time as it is considered a continuous auspicious time.
-
If the areas are far from the initial area you will need a new auspicious time to start the “activity” in another area.
After doing the specified activity at a specified selected date, if you implemented everything correctly, you will see the result within a week to a month but not later than 120 days. If the result is not achieved within this period of time, you should take some relevant photos and bring them together with the floor plan/chart for consultation with your master in order to find a solution. Good luck!
END
